Download
(53 KB)
TROUBLE SHOOTING HINTS
PROBLEM
POSSIBLE CAUSES OF PROBLEM
SUGGESTED REMEDY
Overloading
Inspect the drive to determine the cause of
high load and eliminate
Or
Redesign drive for larger pitch chain
Overloading
Inspect the drive to determine the cause of
high load and eliminate
or
Redesign drive for larger pitch chain
Loading is greater than
pin’s dynamic capacity
Inspect the drive to determine the cause of
high load and eliminate
or
Redesign drive for larger pitch chain
Overloading
Single pitch offset link is to be eliminated
Redesign drive using a higher capacity
chain
Loading is greater than
chain’s dynamic capacity
Single pitch offset link is to be eliminated
Redesign drive using a higher capacity
chain
Stress corrosion cracking
Inspect the drive to determine the cause of
high load and eliminate
Select anti-corrosive chain
Speed too high
Sprockets too small
Chain riding too high on
sprocket teeth
Replace chain, reduce speed
Use larger sprockets or possibly redesign
drive for small sprocket
Chain rubbing on casing,
guide or obstruction
Replace chain if 5% or more height worn
out
Inspect and redesign casing, guide and
eliminate interference
Speed or load too high
Inadequate lubrication
Reduce speed or load
Redesign drive for smaller pitch chain
Provide proper lubrication system
TIDC India
e-mail :
exports@tii.murugappa.com
